This furnace is mainly used for artificial aging treatment of standard profiles produced in the extrusion workshop, so as to eliminate the internal stress of the profiles and improve their mechanical strength.Optimal Vacuum Heat Treatment For Bevel Gears Put the billet on the material frame, push the material frame into the furnace, and close the furnace door.Turn on the heater and fan, observe the temperature rise in the furnace, the general temperature rise rate is 135°C/h, and make a record.Vacuum Hardening Stainless Steel When the temperature in the furnace rises to 200°C, hold the temperature for 2.5 hours.Downtime baked.Strictly implement the shift system. Sintering of B4C by Pressureless Liquid Phase Sintering The shifter should clearly explain the use of the aging furnace and the problems found to the successor, and fill in the shift record. The successor should inquire in detail and check the acceptance.Vacuum Heat Treatment of Fasteners
This furnace is mainly used for artificial aging treatment of standard profiles produced in the extrusion workshop, so as to eliminate the internal stress of the profiles and improve their mechanical strength.Optimal Vacuum Heat Treatment For Bevel Gears Put the billet on the material frame, push the material frame into the furnace, and close the furnace door.Turn on the heater and fan, observe the temperature rise in the furnace, the general temperature rise rate is 135°C/h, and make a record.Vacuum Hardening Stainless Steel When the temperature in the furnace rises to 200°C, hold the temperature for 2.5 hours.Downtime baked.Strictly implement the shift system. Sintering of B4C by Pressureless Liquid Phase Sintering The shifter should clearly explain the use of the aging furnace and the problems found to the successor, and fill in the shift record. The successor should inquire in detail and check the acceptance.Vacuum Heat Treatment of Fasteners